Capability is easier to judge from the constraints than from the equipment list, so this page states both.
Printing
9-colour gravure. Gravure is chosen over flexo for the work this plant does because it holds dense solid colour and fine detail on metallised and foil substrates, which is where the premium pet food and coffee packs live. The trade-off is cylinder cost: gravure is economic from a certain run length upwards, and short runs carry a disproportionate cylinder charge.
Lamination
Solvent-free lamination in-house, with solvent-based lamination for structures that require it. Running lamination behind the press is what allows a structure change and a print change to be evaluated together.
Bag-making
Stand-up and flat-bottom pouches, spout pouches, side-gusset bags, three-side-seal sachets and pillow bags. Zipper, valve, spout, tear notch and hang-hole options are set on the machine, so they are agreed before print rather than after.
Where the limits are
- Gravure economics. Below a certain run length, the cylinder cost dominates. For short runs the honest answer is a different process, not a discount.
- Retort. Retort structures are supplied within the limits of the film and the seal layer; the retort cycle has to be confirmed before the structure is fixed.
- Mono-material barrier. A mono-PE pack can meet a real barrier target, but not necessarily the barrier of the foil laminate it replaces — the shelf life has to be agreed first.