Flexible packaging fails in ways that only appear weeks after filling, so quality control has to be built into the process rather than inspected at the end. What follows is how the plant is organised around that.
Incoming material
Films, adhesives and inks are checked against the specification on receipt: thickness, treatment level, and the batch documentation that the food-contact declaration depends on.
Colour is approved against a signed proof and checked through the run with a spectrophotometer, not by eye. Register is monitored continuously; the eye mark position is verified against the bag-making requirement before the roll is released.
Lamination
Coat weight, nip temperature and cure are recorded per batch. Bond strength is checked on a sample from each lamination, and the retained sample is kept for the shelf life of the order so a later complaint can be tested against the actual material.
Bag-making and slitting
Seal strength, seal width, dimensions and zipper function are checked at the start of each run and at intervals through it. Roll film is checked for repeat length, COF and splice count — the three things that stop a customer's machine.
Food-contact compliance
Materials are selected against FDA (21 CFR 174–178), EU 10/2011 and GB 4806 as applicable to the market where the pack is sold. The declaration of compliance names the structure supplied. Where a customer's retailer requires additional migration testing, it is arranged against the finished pack rather than the base film.
What a customer receives with the order
- Declaration of compliance for the structure supplied.
- Batch records for print, lamination and bag-making.
- Retained samples from the production run.
- Inspection report and loading photographs before shipment.